IMO 413IC Series
MFG in Columbia, KY USA
The 413IC series pump is designed for vertical, deep well submerged operation for unloading barges, small tankers or tanks. The pump discharge is axial along the shaft. The design incorporates a third idler rotor which suppresses vibration and noise when pump is lightly cavitated.
This series pump is simple in design - no timing gears, no precision bearings, no mechanical seals. You also get all the advantages that matter most to you: longer life, lower pressure ripple, lower contamination sensitivity and maximum energy savings, which results in the highest Total Savings of Ownership across the entire life cycle of your pumping equipment solution.
Three-Screw Pumps
The Superior Pumping Technology
Discover our three-screw pumps - the clear choice for superior performance and versatility. The unique design with three interlocking spindles provides an extremely efficient and smooth flow, resulting in impressive overall efficiency.
In addition to excellent controllability, the self-priming pumps offer minimal pulsation and remarkably quiet operation, even at high discharge pressures.
Our three-screw pumps are true all-rounders, capable of handling a wide range of fluids of varying viscosities - from low-viscosity fluids to highly viscous substances. It’s robust design and the high wear resistance of the spindles ensure reliability and long life, making them the ideal choice for critical applications in a variety of industries.
- Simple Design
- No Timings Gears
- No Precision Bearing
- No Mechanical seals
The 413IC pump is designed for vertical, deep well submerged operation for unloading barges, small tankers or tanks. The pump discharge is axial along the shaft. The design incorporates a third idler rotor which suppresses vibration and noise when pump is lightly cavitated.
This 413IC series is available in
Nominal flow rate, GPM/LPM, at 100 PSI (6.9 BAR), 200 SSU (43 CST)
SPEED RPM
|
413IC Series |
1400 |
1200 |
1000 |
800 |
700 |
|
800JD |
2100/7948 |
1750/6624 |
1430/5413 |
1100/4164 |
950/3596 |
Maximum Speed*- 1500 RPM
* Assumes minimum inlet pressure requirements are met.
Construction features
Series 413IC Specifications
Rotor Housing- Bronze
Power Rotor- Alloy steel, hardened.
Idler Rotors- Alloy steel, hardened.
Gaskets- None
Bearing- Internal carbon graphite sleeve
Outlet Pressure- 150 PSIG (10.3 BAR)
Inlet Pressure- Static head to static lift.
Drive- Direct only.
Rotation- Counterclockwise facing pump shaft.
Mounting- For vertical, deep well mounting.
Filtration- Standard pump is equipped with an inlet strainer having 1/4 inch (6.4 MM) openings.
Connections- Inlet is the screened end of the pump. Discharge is through openings in the shaft end of the pump.
Maximum Speed*- 1500 RPM
33 to 20,000 SSU (2.0 to 4300 CST). Lower viscosity ranges require lower allowable differential pressures.
0 to 300°F (-18 to 149°C).
